sales.metacut@gmail.com

011-4287-8285

MT India | NS Tool | NS Tool Japan

NS Tool Japan

AL-3LS

3-Flute Long Shank End Mill for Alminum

Key Features:

  • Slimmed shank suits side milling.
  • Corner-C at flute end effects an accurate side step milling.

AL2D-2

2-Flute End Mill for Aluminum

Key Features:

  • AL-series realized a stable and high efficient machining.
  • L/D=2 to increase rigidity and realize best cost performance.

AL2D-2DLC

DLC COATING 2-Flute End Mill for Aluminum

Key Features:

  • Our original DLC COATING are adopted,it is suitable for cutting for long time.

AL3D-2

2-Flute Medium End Mill for Aluminum

Key Features:

  • AL-series realized a stable and high efficient machining.
  • It exhibits stable excellent surface on a wide area and no chattering occurs even during high speed cutting.

AL3D-2DLC

DLC COATING 2-Flute Medium End Mill for Aluminum

Key Features:

  • AL-series realized a stable and high efficient machining.
  • Our original DLC COATING are adopted,it is suitable for cutting for long time.

AL3D-345

3-Flute Medium End Mill for Aluminum

Key Features:

  • AL-series realized a stable and high efficient machining.
  • It exhibits stable excellent surface on a wide area and no chattering occurs even during high speed cutting.
  • Realized high efficiency machining by adopting 3 flutes.

AL4D-2

2-Flute Medium End Mill for Aluminum

Key Features:

  • It exhibits stable excellent surface on a wide area and no chattering occurs even during high speed cutting.

AL4D-2DLC

DLC COATING 2-Flute Medium End Mill for Aluminum

Key Features:

  • Our original DLC COATING are adopted,it is suitable for cutting for long time.

AL5D-2

2-Flute Long End Mill for Aluminum

Key Features:

  • AL-series realized a stable and high efficient machining.
  • It exhibits stable excellent surface on a wide area and no chattering occurs even during high speed cutting.

AL5D-2DLC

DLC COATING 2-Flute Long End Mill for Aluminum

Key Features:

  • Our original DLC COATING are adopted,it is suitable for cutting for long time.

ALZ345

3-Flute Power “Z” End Mill for Aluminum

Key Features:

  • AL-series realized a stable and high efficient machining.
  • Improved drilling capacity!
  • High performance with better chip disposal.
  • Add new 5D effective length type and long shank type to become 124 sizes.

ALZ345-DLC

DLC COATING 3-Flute Power “Z” End Mill for Aluminum

Key Features:

  • Our original DLC COATING are adopted,it is suitable for cutting for long time.

CED100

Monocrystalline Diamond End Mill “CLEAR EDGE”

Key Features:

  • Direct machining to cemented carbide,hard metal.
  • Enable high-accurate machining to brittle materials.
  • Unique design to maximize performance of monocrystalline diamond.
  • The sizes will no longer be capable being sold after the stock runs out.

DCHR230

DIAMOND COATING 2-Flute Long Neck End Mill

Key Features:

  • Original DIAMOND COATING realized a long tool life for the machining of Graphite,silicon-aluminum alloy and brittle materials.
  • Long neck design is suited for the machining of narrow and deep area.

DCMS

End Mill for Hard Brittle Materials

Key Features:

  • Machinable on hard brittle materials such as cemented carbide and ceramic.
  • High adhered DIAMOND COATING makes tool life long.

DCSE235

DIAMOND COATING 2-Flute End Mill

Key Features:

  • Original DIAMOND COATING realized a long tool life for the machining of graphite,silicon-aluminum alloy and brittle materials.
  • Square design of L/D=3 is suited for the machining of narrow and deep area.

DHR237

Long Neck Square End Mill for Copper Electrode

Key Features:

  • Long neck square end mill specialized for machining copper electrode.
  • Helix angle 37.5 degrees to achieve both sharpness and finished surface quality that prevents scratches on cutting surface.
  • High quality and stable milling performance with long tool life by optimized design and DLC COATING.
  • Machining copper tungsten electrodes is also effective.

DHS

3-Flute Semi-finishing End Mill for Nonferrous

Key Features:

  • Semi-standard item,please inquire for price and delivery.
  • The sizes will no longer be capable being sold after the stock runs out.

DSF

Surface End Mill for Nonferrous

Key Features:

  • Semi-standard item,please inquire for price and delivery.

DX

2-Flute End Mill for Nonferrous

Key Features:

  • Semi-standard item,please inquire for price and delivery.

DXL

2-Flute Long End Mill for Nonferrous

Key Features:

  • Semi-standard item,please inquire for price and delivery.

DXM

2-Flute Medium End Mill for Nonferrous

Key Features:

  • Semi-standard item,please inquire for price and delivery.

MHD445

MUGEN-COATING 4-Flute End Mill for Hardened Steel

Key Features:

  • Machineable to high hardened steels (48~65HRC).
  • Realized high precision finishing without the deflection.

MHD645

MUGEN-COATING 6-Flute End Mill for Hardened Steel

Key Features:

  • Machineable to high hardened steels (48~65HRC).
  • Realized high precision finishing without the deflection.

MHDH445

MUGEN-COATING PREMIUM 4-Flute Square End Mill for Hardened Steel

Key Features:

  • Realized stably long tool life against high hardened steels (48~65HRC).
  • Improved milling deflection and accuracy by advanced flute design.

MHDH645

MUGEN-COATING PREMIUM 6-Flute Square End Mill for Hardened Steel

Key Features:

  • L/D=2 and L/D=3 length of cut selection.
  • Realized stably long tool life against high hardened steels (48~65HRC).
  • Improved milling deflection and accuracy by advanced flute design.

MHR230

MUGEN-COATING 2-Flute Long Neck End Mill

Key Features:

  • MUGEN-COATING has been put on our original end mill for deep rib.
  • The Long neck type is suitable for narrow and deep machining.
  • Total 217 sizes!

MHR430

MUGEN-COATING 4-Flute Long Neck End Mill

Key Features:

  • MUGEN-COATING has been put on our original end mill for deep rib.
  • The Long neck type is suitable for narrow and deep machining.

MHRH230

MUGEN-COATING PREMIUM 2-Flute Long Neck End Mill for Hardened Steel

Key Features:

  • MUGEN-COATING PREMIUM to improve accuracy and tool life on machining hardened steels!
  • Total 134 sizes!

MHRH430

MUGEN-COATING PREMIUM 4-Flute Long Neck End Mill for Hardened Steel

Key Features:

  • MUGEN-COATING PREMIUM to improve accuracy and tool life on machining hardened steels!
  • Improve tool rigidity for precision machining!
  • Total 55 sizes!

MHRLN230-6

MUGEN-COATING 2-Flute Long Neck End Mill (Shank Dia. 6)

Key Features:

  • Semi-standard item,please inquire for price and delivery.

MSCZ440

MUGEN-COATING 4-Flute High Efficient ”Z” End Mill for Carbon Steels

Key Features:

  • Unequal flute spacing, unequal helix angle and high rigid end profile design to minimize chatter realize high efficient machining.
  • New developed special edge profile realized multi-functional performance of side milling, slot milling and drilling approaches on carbon steels.
  • Long time stable machining is realized by adopting MUGEN-COATING.

MSCZ440-LN

MUGEN-COATING 4-Flute Long Neck High Efficient ”Z” End Mill for Carbon Steels

Key Features:

  • Unequal flute spacing, unequal helix angle and high rigid end profile design to minimize chatter realize high efficient machining.
  • New developed special edge profile realized multi-functional performance of side milling, slot milling and drilling approaches on carbon steels.
  • Long neck type prevent interference with work material, the effective length lined up with L/D=3 to 5.

MSE230

MUGEN-COATING 2-Flute End Mill

Key Features:

  • Our original MUGEN-COATING has been put on 2-flute end mill.
  • It covers all-round cutting from roughing to finishing.
  • 【■】:Semi-Standerd item,please inquire for price and delivery.

MSE230M

MUGEN-COATING 2-Flute End Mill with measured diameter

Key Features:

  • Printed actual measurement of diameter in micron.

MSE230SS

MUGEN-COATING 2-Flute Super Short End Mill

Key Features:

  • Semi-standard item,please inquire for price and delivery.

MSE245

MUGEN-COATING 2-Flute End Mill

Key Features:

  • Our original MUGEN-COATING has been put on 2-flute end mill.
  • Compared with 30°helix angle,it can be reduced cutting resistance.

MSE345

MUGEN-COATING 3-Flute End Mill

Key Features:

  • Our original MUGEN-COATING has been put on 3-flute end mill.
  • Compared with 30°helix angle,it can be reduced cutting resistance.

MSE430

MUGEN-COATING 4-Flute End Mill

Key Features:

  • Our original MUGEN-COATING has been put on 4-flute end mill.
  • It can be cut from non-hardened materials to hardened materials.

MSE430P

MUGEN-COATING 4-Flute Sharp Edge End Mill

Key Features:

  • It can be cut from nonferrous to steels due to the sharp edges.
  • Minimize tool deflection for accurate finishing.

MSE445

MUGEN-COATING 4-Flute End Mill

Key Features:

  • Our original MUGEN-COATING has been put on 4-flute end mill.
  • Compared with 30°helix angle,it can be reduced cutting resistance.

MSEM230

MUGEN-COATING 2-Flute Medium End Mill

Key Features:

  • L/D=4 and helix 30°.

MSEM430

MUGEN-COATING 4-Flute Medium End Mill

Key Features:

  • L/D=4 and helix 30°.
  • It is very suitable for finishing side milling.

MSES230P

MUGEN-COATING 2-Flute Sharp Edge Short End Mill

Key Features:

  • It is very suitable for high speed cutting due to the length of cut is short and rigid.
  • Sharp edge profile guarantees high shearing ability.